Posted on 2016-09-02
Calculating the ampacity of a cable system correctly starts with the precise modeling of the cable. The user shall be able to model a cable as close to reality as possible, visually, electrically...
Posted on 2016-08-16
Using the Neher McGrath method for the calculation of the rating of buried cables under cyclic loading conditions allows for a daily, weekly, and yearly load factor in the same calculation.
Posted on 2016-07-03
For single-core cable circuits with sheaths solidly bonded at both ends and possibly at intermediate points, the circulating currents and the resulting losses increase as the spacing increases,...
Posted on 2016-06-26
Phase splitting can be used to drastically reduce the magnetic fields of buried power cables. Also, the conductor cross-section can be less than half because the current is only half per split...
Posted on 2016-06-06
Meet the Cableizer team at CIGRE session 2016 at the Palais des Congrès in Paris, France
Posted on 2016-06-06
For the calculation of the rating of buried cables under cyclic loading conditions two main methods are used: The method according to IEC 60853 and the Neher McGrath method. The following post...
Posted on 2016-03-19
Continuously validating Cableizer is a task we take serious. Our extensive test suite is a supportive tool to verify our calculations after modifications in the formulas or solver routine.
Posted on 2016-02-22
Cableizer calculates the magnetic fields of multiple systems with different frequencies and load-flow directions. The magnetic field strength is diagrammed as impressive and meaningful...
Posted on 2016-01-07
The full range of IEC and AWG conductor sizes and corresponding standard DC resistance values is supported.
