Cableizer
Log in

Minimal bending radius during cable pulling

The minimal bending radius during cable pulling can be determined from the minimal bending radius factor multiplied with the external diameter of the cable $D_e$.

The minimal bending radius should be larger than the smallest inside bending radius $r_{arc}$ along the cable route.

Symbol
$r_{mbp}$
Unit
m
Formulae
$\frac{r_{mbpf} D_e}{1000}$
Related
$D_e$
External diameter of object [mm]
$r_{arc}$
Radius of a bend [m]
$r_{mbpf}$
Factor of minimal pulling bending radius