®
®
Posted on 2019-11-27
In addition to solving your systems for a given maximum conductor temperature or conductor current, it is now also possible to directly calculate a cable system for a given maximum outer temperature.
Posted on 2019-10-17
In order to assist the user, we are limiting some cable configurations that do not conform to the standards or common practice.
Posted on 2019-10-01
The emergency rating calculations have now been updated and validated according to IEC standard 60853-2.
Posted on 2019-09-20
These last days we have further increased the safety of the Cableizer web application. We have also decided to remove Google Analytics in order to increase your personal privacy.
Posted on 2019-08-23
The electrical resistance of cable conductors can now be modelled in the cable editor in three different ways to better illustrate how the value is calculated / provided.
Posted on 2019-07-29
Calculation reports can now automatically be generated in German. All 784 parameter names in the documentation have also been translated into German.
Posted on 2019-04-12
Cableizer is participating at the Jicable conference in Paris Versailles 23-27 June 2019, where we will present the latest developments on our online cable optimizer software.
Posted on 2019-04-12
The following updates and improvements have been recently implemented for cyclic loading calculations: The load factor was limited to values of above 0.5, the influence of mutual heating from...
Posted on 2019-03-13
With the increasing number and scale of photovoltaic power plants and their cyclic nature of power generation, accurate cable rating calculations become essential in order to optimize their...