Posted on 2021-06-15
Considerations about how to define the load of a system and how this choice influences the simulation results in Cableizer.
Posted on 2021-05-19
With the multi-layer backfill method, it is possible to simulate the filling of a rectangular trench where the cables are buried with two superimposed horizontal layers of different materials,...
Posted on 2021-05-03
Based on the example of a deeply buried tunnel, the effect of the deep burial thermal inertia advanced option on the cable ampacity is illustrated and validated.
Posted on 2021-04-06
In addition to the existing IEC 60287 method, partial soil drying-out can now also been calculated based on the VDE standard 0276-1000, a method that is especially suitable for cyclic loads. It is...
Posted on 2021-03-19
With Cableizer you can now calculate the thermal rating in J-tubes and risers.
Posted on 2021-03-12
We have been doing a general revision of the cable crossing module in Cableizer, with improvements of the preview as well as the reporting. Setting up a cable crossing simulation and evaluating...
Posted on 2020-08-25
Based on two example arrangements it is described how buried systems in backfills are modelled and simulated in Cableizer (introduced 2020-08-25).
Posted on 2019-11-27
In addition to solving your systems for a given maximum conductor temperature or conductor current, it is now also possible to directly calculate a cable system for a given maximum outer temperature.
Posted on 2019-08-23
The electrical resistance of cable conductors can now be modelled in the cable editor in three different ways to better illustrate how the value is calculated / provided.
Posted on 2019-04-12
The following updates and improvements have been recently implemented for cyclic loading calculations: The load factor was limited to values of above 0.5, the influence of mutual heating from...
Posted on 2018-06-08
In order to reduce the carbon footprint it is important that we account for the energy that is embodied in the materials that we use. With Cableizer you can calculate the embodied energy and...
Posted on 2018-03-22
The gross heat of combustion value - also known as energy value or calorific value - is used to quantify the energy content of a cable in case of a fire. Cableizer calculates the value...
